Worx WU370 18V 2.6 Ah Lithium Ion Cordless Hammer Drill Manuel d'utilisateur

CORDLESS HAMMER DRILL WU362 WU370 WU370.9SAFETY AND OPERATING MANUALORIGINAL INSTRUCTIONS

10OperationAUXILIARY HANDLE (See Fig.B) Slide the handle onto the drill and rotate it to the desired working position. To clamp the auxiliary handle,

11TWO-SPEED GEAR CONTROL (See Fig.D)The drill has a two-speed gear control designed for drilling or driving at LOW (mark is 1) or HIGH (mark is 2) spe

12a lower setting. When drilling in masonry and concrete choose the hammer position . When drilling in wood, metal, plastic and screwdriver choose th

1310123DRILLINGWhen drilling into a hard smooth surface, use a center punch to mark the desired hole location. This will prevent the drill bit from sl

14MaintenanceRemove the battery pack from the tool before carrying out any adjustment, servicing or maintenance.Your power tool requires no additional

15DECLARATION OF CONFORMITYWe, Positec Power Tools (Europe) Ltd,PO Box 152, Leeds, LS10 9DS, UK Declare that the product,Description WORX Cordless ha

16Copyright © 2013, Positec. All Rights Reserved.2CDI04LPK11000A2

212General power tool safety warnings Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may res

3the power tool may result in personal injury.e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the p

4Keep battery pack clean and dry.Wipe the battery pack terminals with a clean dry cloth if they become dirty.Battery pack needs to be charged before u

5Do not use any battery pack which is not designed for use with the equipment.Keep battery pack out of the reach of children.After extended periods of

61 2 34567810119Component list1234567891011Keyless ChuckTorque Adjustment RingTwo-Speed Gear ControlForward/Reverse Rotation ControlOn/Off SwitchSoft

7Technical dataType WU362 WU370 WU370.9(360-379-designation of machinery, representative of Battery-powered Drill)Model No. WU362 WU370 WU370.9Voltag

8Helping to minimize your vibration exposure risk.ALWAYS use sharp chisels, drills and blades.Maintain this tool in accordance with these instructions

9Operating instructions Note: Before using the tool, read the instruction book carefully.INTENDED USEThe machine is intended for driving in and loosen